Artwork Guidelines
To ensure your custom packaging looks as vibrant and polished as possible, please review the following artwork requirements before submitting your files:
File Format
- Accepted formats: Adobe Illustrator (.ai), EPS, PDF (vector preferred)
- Ensure all text is outlined and fonts are embedded.
- Raster files (.jpg, .png, .psd) must be 300 DPI or higher.
Color Mode
- Files must be in CMYK color mode (not RGB) for accurate printing results.
- Pantone (PMS) colors should be specified if exact color matching is required.
Resolution & Size
- All raster images must be at least 300 DPI at full print size.
- Please use the provided Packarooo dieline templates to set up your design correctly.
- Extend artwork at least 1/8” (0.125") beyond the trim line to allow for full bleed printing.
Safe Zones
- Keep important text and logos at least 1/8” inside from all edges to prevent accidental trimming.
Proofing
- A digital proof will be provided for approval before final production.
- Packarooo offers unlimited digital proof revisions for Packarooo+ members!
Important Notes:
- Colors may vary slightly between screen previews and final printed product due to printing process limitations.
- Low-resolution or incorrectly formatted files may result in delays.
Need Help?
If you’re unsure about your artwork setup, don’t worry — our design team is happy to assist!
We also offer full design services and file preparation support. Contact Us for help.